Hongda America

Share to:


Motor SEW or Nord.
Material 304 or 316 Stainless Steel
Finish high-polished sanitary finish
Legs Adjustable stainless steel legs.
Phone +1-(626)320-2070
Contact info@hongdaamerica.com
Standard Features
Working principle
Structural characteristics
Technical parameters

Standard Features:

Interior Construction: 304 or 316 Stainless Steel, with #4 finish.

Exterior Construction: 304 Stainless Steel, with #4 or #28 finish.

Heat Transfer: ASME stamped jackete could choose.

Surface: Sanitary finish.

Insulation: No insulation or polyurethane 2” thick.

Vertical Agitation: Single/double/triple agitators.

Motor: SEW or Nord.

Tank Top: Inverted cone with 15 degree slope or hemispherical head with double open hinged lids, CIP cleaning.

Tank Bottom: Conical with 15 or 30 degree slope and center outlet.

Inlet/Outlet Ports: Sanitary clamp connections.

Temperature lndicating: 1/2” FNPT and 11/4” UNEF temperature sensor interface.

Legs: Adjustable stainless steel legs.

Application: Stainless steel jacketed liquefier mainly used for food and dairy, size range from from 50 to 1000 gallons.


The useage of products

A Disperser is used to break apart or dissolvesolid particles in a liquid. This is typically accomplished using a “saw tooth”blade rotating at high speed. The blade imparts high shear forces to theingredients being dispersed, breaking them apart. Through proper bladeselection and sizing, a flow can be established that will repeatedly turn overthe batch and yield a homogeneous product. Dispersers are most often used tomix low viscosity products.

Working principle

High Speed Dispersers   is to incorporate powders into liquid and break down particle agglomerates to produce a fine dispersion. Running at tip speeds up to around 5,000 ft/min, the open disc blade of the High Speed Disperser generates vigorous flow and a characteristic vortex into which dry ingredients are added for quick wet-out. This classic mixer can handle product viscosities from water-like to up to 50,000 centipoise.


Structural characteristics

The equipment is composed of cylinder, stator, rotor, mechanical seal, liquifier hub, motor, frame and so on. The process of emulsification and compounding is based on the working principle of the liquifier hub's rapid rotation and centrifugation. The materials are subjected to sharp compression, stretching and shearing, so that the materials are fully and optimally mixed.

The raw materials of the cylinder body are made of SUS304, the inner and outer surfaces are treated, and the joint of the stator and the rotating shaft is assembled with a mechanical seal, which does not leak and is reliable in use.

Online Selection
Mixing Material
Feeding Port
Discharge Port
Your Name
Your E-mail Address
Your Phone Number

About us

We are the manufacturer of pressure vessels,sanity related tank and mixer, filteration

vessel, and other products. We also engaged in designing, manufacturing, and assembling of machines in food industry, pharmaceutical, and chemical area.

The company's broad product line includes American Society of Mechanical Engineers (ASME-U) approved pressure vessel ranging in size from 1 to 30000 gallons (for all of your registration requirements), Hongda has been authorized by 3A, PED, and ISO9001.


America sales company: Hongda Amercia Corp

1932 S.Lynx Place, ON, CA, USA, 91761

Phone: +1-(626)320-2070  Email: info@hongdaamerica.com

China sales company: Shaanxi Wayboo industry Co.,LTD

Factory: Shaanxi Hongda Industry Co.,LTD

Phone: +86-029-87801888 / 87802888 / 87803888