Hongda America

Share to:
Liquifier
Motor: SEW or Nord.
Material: 304 or 316 Stainless Steel
Finish: high-polished sanitary finish
Legs: Adjustable stainless steel legs.
Phone: +1-(626)320-2070
Contact: info@hongdaamerica.com
Standard Features
Useage
Working principle
Structural characteristics
Technical parameters
ABUIABACGAAg5tiL9wUo5sK12gYwwgM4hQI

Standard Features:

Interior Construction: 304 or 316 Stainless Steel, with #4 finish.

Exterior Construction: 304 Stainless Steel, with #4 or #28 finish.

Heat Transfer Surface: No heating or side and bottom stainless steel dimple jacket rated for 75 psi.

Insulation: No insulation or polyurethane 2” thick.

Vertical Agitation: Single agitator, bottom liquidation.

Motor: SEW or Nord.

Tank Top: Inverted cone with 15 degree slope or hemispherical head with double open hinged lids, CIP cleaning.

Tank Bottom: Conical with 15 or 30 degree slope and center outlet.

Inlet/Outlet Ports: Sanitary clamp connections.

Temperature lndicating: 1/2” FNPT and 11/4” UNEF temperature sensor interface.

Legs: Adjustable stainless steel legs.

Application: Stainless steel jacketed liquifier mainly used for food and dairy, size range from from 50 to 300 gallons, square and circular is optional.

   





The useage of products

The high speed emulsifying equipment is the most advanced emulsifying equipment in China at present. It has several advantages, such as reasonable structure, reliable quality, light weight, strong production capacity, convenient cleaning, convenient operation and beautiful appearance of the equipment. The equipment is suitable for the dairy industry, pharmaceutical industry, and the necessary equipment for mixed processing with liquid as medium.

Working principle

Liquifier is a device for the process of efficiently, quickly and uniformly feeding one phase or multiple phases (liquid, solid, gas) into another immiscible continuous phase (usually liquid). Under normal circumstances, the phases are incompatible with each other. When external energy is input, the two materials recombine into a homogeneous phase. The liquifier has strong kinetic energy due to the high tangential speed and high frequency mechanical effect produced by the high-speed rotation of the rotor. The emulsifier causes the material to be subjected to strong mechanical and hydraulic shear, centrifugal extrusion, and liquid in the narrow gap between the stator and the rotor. Layer friction, impact tearing and turbulence are combined to form suspension (solid/liquid), emulsion (liquid/liquid) and foam (gas/liquid). In this way, the immiscible solid phase, liquid phase, and gas phase are uniformly and finely dispersed and emulsified instantaneously under the combined action of the corresponding mature technology and the appropriate amount of additives, and the emulsifier is cyclically reciprocated at high frequencies, and finally stable high-quality products are obtained.

ABUIABACGAAgytyL9wUo6KnByQUw6QU48AI

Structural characteristics

The equipment is composed of cylinder, stator, rotor, mechanical seal, liquifier hub, motor, frame and so on. The process of emulsification and compounding is based on the working principle of the liquifier hub's rapid rotation and centrifugation. The materials are subjected to sharp compression, stretching and shearing, so that the materials are fully and optimally mixed.

The raw materials of the cylinder body are made of SUS304, the inner and outer surfaces are treated, and the joint of the stator and the rotating shaft is assembled with a mechanical seal, which does not leak and is reliable in use.




Online Selection
Mixing Material
Motor
Material
Capacity
Feeding Port
Discharge Port
Volts
Your Name
Your E-mail Address
Your Phone Number
Message
Structure
Submit

About us


We are the manufacturer of pressure vessels,sanity related tank and mixer, filteration

vessel, and other products. We also engaged in designing, manufacturing, and assembling of machines in food industry, pharmaceutical, and chemical area.

The company's broad product line includes American Society of Mechanical Engineers (ASME-U) approved pressure vessel ranging in size from 1 to 30000 gallons (for all of your registration requirements), Hongda has been authorized by 3A, PED, and ISO9001.


Contact

America sales company: Hongda Amercia Corp

1932 S.Lynx Place, ON, CA, USA, 91761

Phone: +1-(626)320-2070  Email: info@hongdaamerica.com

China sales company: Shaanxi Wayboo industry Co.,LTD

Factory: Shaanxi Hongda Industry Co.,LTD

Phone: +86-029-87801888 / 87802888 / 87803888